1. General description
The TDA9983B is an HDMI transmitter (which also supports DVI) that enables a 3 × 8-bit
RGB or YC
B
C
R
video stream (with a pixel rate up to 150 MHz for the TDA9983BHW/15
version), up to 4 I
2
S-bus audio streams (with an audio sampling rate up to 192 kHz) and
the additional information required by all the HDMI 1.2a standards.
A programmable upscaling block enables a 720p/1080i output from a standard definition
input. An intrafield deinterlacer is included in the scaler.
In order to be compatible with most applications, the TDA9983B integrates a full
programmable input formatter and color space conversion block. The video input formats
accepted are YC
B
C
R
4 : 4 : 4 (up to 3 × 8-bit), YC
B
C
R
4:2:2 semi-planar (up to
2 × 12-bit), YC
B
C
R
4 : 2 : 2 compliant with ITU656 and ITU656-like (up to 1 × 12-bit).
For ITU656-like formats, double edges are supported so that data can be sampled on
rising and falling edges.
The device can be controlled via an I
2
C-bus interface.
2. Features
n 3 × 8-bit video data input bus, CMOS and LV-TTL compatible
n Horizontal synchronization, vertical synchronization and Data Enable (DE) inputs or
VREF, HREF and FREF could be used for input data synchronization
n Pixel rate clock input can be made active on one or both edges (selectable by I
2
C-bus)
n The TDA9983B has 4 I
2
S-bus audio input channels and 1 S/PDIF channel; audio
sampling rate up to 192 kHz
n 250 MHz to 1.50 GHz HDMI transmitter operation
n Programmable input formatter and upsampler/interpolator allows input of any of the
4:4:4, 4:2:2 semi-planar, 4:2:2 ITU656 and ITU656-like formats
n Programmable color space converter:
u RGB to YC
B
C
R
u YC
B
C
R
to RGB
n The upscaler enables a 720p/1080i output from a standard definition input using
intelligent edge interpolation
n Controllable via I
2
C-bus
n Low power dissipation
n 1.8 V and 3.3 V power supplies
n Power-down mode
TDA9983B
HDMI transmitter up to 150 MHz pixel rate with 3 × 8-bit video
inputs and 4 × I
2
S-bus with S/PDIF
Rev. 01 — 20 May 2008 Product data sheet
TDA9983B_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 20 May 2008 2 of 119
NXP Semiconductors
TDA9983B
150 MHz pixel rate HDMI transmitter
n Hard reset
3. Applications
n DVD players and recorders
n Set-Top Box (STB)
n AV receivers and amplifiers (repeater)
n Camcorders
n Digital still cameras
n Media players
n PVRs
n Media centers PCs, graphics add-in boards, notebook PCs
n Switches
4. Quick reference data
Table 1. Quick reference data
V
DDA(FRO_3V3)
= 3.0 V to 3.6 V; V
DDA(PLL_3V3)
= 3.0 V to 3.6 V; V
DDH(3V3)
= 3.0 V to 3.6 V;
V
DDD(3V3)
= 3.0 V to 3.6 V; V
DDC(1V8)
= 1.65 V to 1.95 V; V
PP
= 0 V; T
amb
= 0
°
C to 70
°
C.
Typical values are measured at V
DDA(FRO_3V3)
= V
DDA(PLL_3V3)
= V
DDH(3V3)
= V
DDD(3V3)
= 3.3 V;
V
DDC(1V8)
= 1.8 V; V
PP
= 0 V and T
amb
= 25
°
C; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
TDA9983BHW/8 and TDA9983BHW/15
V
DDA(FRO_3V3)
free running oscillator 3.3 V
analog supply voltage
3.0 3.3 3.6 V
V
DDA(PLL_3V3)
PLL 3.3 V analog supply
voltage
3.0 3.3 3.6 V
V
DDD(3V3)
digital supply voltage (3.3 V)
[1]
3.0 3.3 3.6 V
V
DDH(3V3)
HDMI supply voltage (3.3 V) 3.0 3.3 3.6 V
V
DDC(1V8)
core supply voltage (1.8 V)
[1]
1.65 1.8 1.95 V
T
amb
ambient temperature 0 - 70 °C
TDA9983BHW/8; up to 81 MHz
f
clk(max)
maximum clock frequency
[2]
81 - - MHz
P
cons
power consumption
[2]
- 322 - mW
worst case
[3]
- 338 503 mW
P
tot
total power dissipation
[2]
- 458 - mW
worst case
[3]
- 472 651 mW
P
pd
power dissipation in
power-down mode
- 13.5 38.4 mW
TDA9983B_1 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 01 — 20 May 2008 3 of 119
NXP Semiconductors
TDA9983B
150 MHz pixel rate HDMI transmitter
[1] The V
DDD(3V3)
and V
DDC(1V8)
power supplies must always follow the sequence shown in Figure 14 to ensure
proper power-up conditions.
[2] Video format:
a) Input 480p (ITU656 embedded sync, rising edge)
b) Output 1080i (YC
B
C
R
4 : 2 : 2)
[3] Worst case video format:
a) Input 480p (YC
B
C
R
4 : 2 : 2 semi-planar)
b) Output 720p (YC
B
C
R
4 : 2 : 2)
[4] Video format:
a) Input 1080p (RGB 4 : 4 : 4 external sync, rising edge)
b) Output 1080p (RGB 4 : 4 : 4)
5. Ordering information
5.1 Ordering options
TDA9983BHW/15; up to 150 MHz
f
clk(max)
maximum clock frequency
[4]
150 - - MHz
P
cons
power consumption
[4]
- 361 583 mW
P
tot
total power dissipation
[4]
- 495 732 mW
P
pd
power dissipation in
power-down mode
- 13.5 38.4 mW
Table 1. Quick reference data
…continued
V
DDA(FRO_3V3)
= 3.0 V to 3.6 V; V
DDA(PLL_3V3)
= 3.0 V to 3.6 V; V
DDH(3V3)
= 3.0 V to 3.6 V;
V
DDD(3V3)
= 3.0 V to 3.6 V; V
DDC(1V8)
= 1.65 V to 1.95 V; V
PP
= 0 V; T
amb
= 0
°
C to 70
°
C.
Typical values are measured at V
DDA(FRO_3V3)
= V
DDA(PLL_3V3)
= V
DDH(3V3)
= V
DDD(3V3)
= 3.3 V;
V
DDC(1V8)
= 1.8 V; V
PP
= 0 V and T
amb
= 25
°
C; unless otherwise specified.
Symbol Parameter Conditions Min Typ Max Unit
Table 2. Ordering information
Type number Package
Name Description Version
TDA9983BHW HTQFP80 plastic thermal enhanced thin quad flat package;
80 leads; body 12 × 12 × 1 mm; exposed die pad
SOT841-4
Table 3. Survey of type numbers
Extended type number Sampling frequency
(Msample/s)
Application
TDA9983BHW/8/C1 81 customer specific version
TDA9983BHW/15/C1 150 customer specific version

TDA9983BHW/8/C1,51

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
IC HDMI TX 81MHZ 80-HTQFP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet