1. General description
The SC16IS752/SC16IS762 is an I
2
C-bus/SPI bus interface to a dual-channel high
performance UART offering data rates up to 5 Mbit/s, low operating and sleeping current;
it also provides the application with 8 additional programmable I/O pins. The device
comes in very small HVQFN32 and TSSOP28 packages, which makes it ideally suitable
for hand-held, battery-operated applications. This chip enables seamless protocol
conversion from I
2
C-bus/SPI to RS-232/RS-485 and is fully bidirectional.
The SC16IS762 differs from the SC16IS752 in that it supports SPI clock speeds up to
15 Mbit/s instead of the 4 Mbit/s supported by the SC16IS752, and in that it supports IrDA
SIR up to 1.152 Mbit/s. In all other aspects, the SC16IS762 is functionally and electrically
the same as the SC16IS752.
The SC16IS752/SC16IS762’s internal register set is backward compatible with the widely
used and widely popular 16C450. This allows the software to be easily written or ported
from another platform.
The SC16IS752/SC16IS762 also provides additional advanced features such as auto
hardware and software flow control, automatic RS-485 support and software reset. This
allows the software to reset the UART at any moment, independent of the hardware reset
signal.
2. Features and benefits
2.1 General features
Dual full-duplex UART
I
2
C-bus or SPI interface selectable
3.3 V or 2.5 V operation
Industrial temperature range: 40 C to +95 C
64 bytes FIFO (transmitter and receiver)
Fully compatible with industrial standard 16C450 and equivalent
Baud rates up to 5 Mbit/s in 16 clock mode
Auto hardware flow control using RTS
/CTS
Auto software flow control with programmable Xon/Xoff characters
Single or double Xon/Xoff characters
Automatic RS-485 support (automatic slave address detection)
Up to eight programmable I/O pins
RS-485 driver direction control via RTS
signal
SC16IS752; SC16IS762
Dual UART with I
2
C-bus/SPI interface, 64 bytes of transmit
and receive FIFOs, IrDA SIR built-in support
Rev. 9 — 22 March 2012 Product data sheet
SC16IS752_SC16IS762 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 9 — 22 March 2012 2 of 60
NXP Semiconductors
SC16IS752; SC16IS762
Dual UART with I
2
C-bus/SPI interface, 64-byte FIFOs, IrDA SIR
RS-485 driver direction control inversion
Built-in IrDA encoder and decoder supporting IrDA SIR with speeds up to 115.2 kbit/s
SC16IS762 supports IrDA SIR with speeds up to 1.152 Mbit/s
1
Software reset
Transmitter and receiver can be enabled/disabled independent of each other
Receive and Transmit FIFO levels
Programmable special character detection
Fully programmable character formatting
5-bit, 6-bit, 7-bit or 8-bit character
Even, odd, or no parity
1, 1
1
2
, or 2 stop bits
Line break generation and detection
Internal Loopback mode
Sleep current less than 30 A at 3.3 V
Industrial and commercial temperature ranges
5 V tolerant inputs
Available in HVQFN32 and TSSOP28 packages
2.2 I
2
C-bus features
Noise filter on SCL/SDA inputs
400 kbit/s (maximum)
Compliant with I
2
C-bus Fast mode
Slave mode only
2.3 SPI features
SC16IS752 supports 4 Mbit/s maximum SPI clock speed
SC16IS762 supports 15 Mbit/s maximum SPI clock speed
Slave mode only
SPI Mode 0
3. Applications
Factory automation and process control
Portable and battery operated devices
Cellular data devices
1. Please note that IrDA SIR at 1.152 Mbit/s is not compatible with IrDA MIR at that speed. Please refer to application notes for
usage of IrDA SIR at 1.152 Mbit/s.
SC16IS752_SC16IS762 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 9 — 22 March 2012 3 of 60
NXP Semiconductors
SC16IS752; SC16IS762
Dual UART with I
2
C-bus/SPI interface, 64-byte FIFOs, IrDA SIR
4. Ordering information
Table 1. Ordering information
Type number Package
Name Description Version
SC16IS752IPW TSSOP28 plastic thin shrink small outline package; 28 leads; body width 4.4 mm SOT361-1
SC16IS762IPW
SC16IS752IBS HVQFN32 plastic thermal enhanced very thin quad flat package; no leads; 32 terminals;
body 5 5 0.85 mm
SOT617-1
SC16IS762IBS

SC16IS752IBS,128

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
UART Interface IC I2C/SPI-UARTBRIDGE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union