M25P128 Serial Flash Embedded
Memory with 54 MHz SPI Bus Interface
Features
SPI bus-compatible serial interface
128Mb Flash memory
54 MHz clock frequency (maximum)
2.7V to 3.6V single supply voltage
V
PP
= 9V for fast program/erase mode (optional)
Page program (up to 256 bytes) in
0.5ms (TYP)
0.4ms (TYP with V
PP
= 9V)
Erase capability
Sector erase: 2Mb
Bulk erase: 128Mb
Electronic signature
JEDEC-standard 2-byte signature (2018h)
More than 100,000 PROGRAM/ERASE cycles per
sector
More than 20 years data retention
Automotive-grade parts available
Packages (RoHS-compliant)
VFDFPN8 (MLP8) 8mm x 6mm (Package code:
ME)
SO16W 300 mils (Package code: MF)
M25P128 Serial Flash Embedded Memory
Features
CCMTD-1718347970-10412
m25p_128.pdf - Rev. A 11/16 EN
1
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
Contents
Functional Description ..................................................................................................................................... 5
Signal Descriptions ........................................................................................................................................... 7
SPI Modes ........................................................................................................................................................ 8
Operating Features ......................................................................................................................................... 10
Page Programming ..................................................................................................................................... 10
Sector Erase, Bulk Erase .............................................................................................................................. 10
Polling during a Write, Program, or Erase Cycle ............................................................................................ 10
Fast Program/Erase Mode ........................................................................................................................... 10
Active Power and Standby Power ................................................................................................................. 10
Status Register ............................................................................................................................................ 11
Data Protection by Protocol ........................................................................................................................ 11
Software Data Protection ............................................................................................................................ 11
Hardware Data Protection .......................................................................................................................... 11
Hold Condition .......................................................................................................................................... 12
Configuration and Memory Map ..................................................................................................................... 13
Memory Configuration and Block Diagram .................................................................................................. 13
Memory Map – 128Mb Density ....................................................................................................................... 14
Command Set Overview ................................................................................................................................. 15
WRITE ENABLE .............................................................................................................................................. 17
WRITE DISABLE ............................................................................................................................................. 18
READ IDENTIFICATION ................................................................................................................................. 19
READ STATUS REGISTER ................................................................................................................................ 20
WIP Bit ...................................................................................................................................................... 21
WEL Bit ...................................................................................................................................................... 21
Block Protect Bits ....................................................................................................................................... 21
SRWD Bit ................................................................................................................................................... 21
WRITE STATUS REGISTER .............................................................................................................................. 22
READ DATA BYTES ......................................................................................................................................... 24
READ DATA BYTES at HIGHER SPEED ............................................................................................................ 25
PAGE PROGRAM ............................................................................................................................................ 26
SECTOR ERASE .............................................................................................................................................. 27
BULK ERASE .................................................................................................................................................. 28
Power-Up/Down and Supply Line Decoupling ................................................................................................. 29
Power-Up Timing and Write Inhibit Voltage Threshold Specifications ............................................................... 30
Initial Delivery Status ..................................................................................................................................... 31
Maximum Ratings and Operating Conditions .................................................................................................. 32
Electrical Characteristics ................................................................................................................................ 33
AC Characteristics .......................................................................................................................................... 34
Package Information ...................................................................................................................................... 39
Device Ordering Information .......................................................................................................................... 41
Standard Parts ............................................................................................................................................ 41
Revision History ............................................................................................................................................. 42
Rev. A – 11/16 ............................................................................................................................................. 42
M25P128 Serial Flash Embedded Memory
Features
CCMTD-1718347970-10412
m25p_128.pdf - Rev. A 11/16 EN
2
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
List of Figures
Figure 1: Logic Diagram ................................................................................................................................... 5
Figure 2: Pin Connections: VDFPN ................................................................................................................... 5
Figure 3: Pin Connections: SO .......................................................................................................................... 6
Figure 4: SPI Modes Supported ........................................................................................................................ 8
Figure 5: Bus Master and Memory Devices on the SPI Bus ................................................................................. 9
Figure 6: Hold Condition Activation ............................................................................................................... 12
Figure 7: Block Diagram ................................................................................................................................ 13
Figure 8: WRITE ENABLE Command Sequence .............................................................................................. 17
Figure 9: WRITE DISABLE Command Sequence ............................................................................................. 18
Figure 10: READ IDENTIFICATION Command Sequence ................................................................................ 19
Figure 11: READ STATUS REGISTER Command Sequence .............................................................................. 20
Figure 12: Status Register Format ................................................................................................................... 20
Figure 13: WRITE STATUS REGISTER Command Sequence ............................................................................. 22
Figure 14: READ DATA BYTES Command Sequence ........................................................................................ 24
Figure 15: READ DATA BYTES at HIGHER SPEED Command Sequence ........................................................... 25
Figure 16: PAGE PROGRAM Command Sequence ........................................................................................... 26
Figure 17: SECTOR ERASE Command Sequence ............................................................................................. 27
Figure 18: BULK ERASE Command Sequence ................................................................................................. 28
Figure 19: Power-Up Timing .......................................................................................................................... 30
Figure 20: AC Measurement I/O Waveform ..................................................................................................... 34
Figure 21: Serial Input Timing ........................................................................................................................ 36
Figure 22: Write Protect Setup and Hold during WRSR when SRWD = 1 Timing ................................................ 37
Figure 23: Hold Timing .................................................................................................................................. 37
Figure 24: Output Timing .............................................................................................................................. 38
Figure 25: V
PPH
Timing .................................................................................................................................. 38
Figure 26: VFDFPN8 (MLP8) 8mm x 6mm – Package Code: ME ....................................................................... 39
Figure 27: SO16W 300 mils Body Width – Package Code: MF ........................................................................... 40
M25P128 Serial Flash Embedded Memory
Features
CCMTD-1718347970-10412
m25p_128.pdf - Rev. A 11/16 EN
3
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.

M25P128-VME6GB

Mfr. #:
Manufacturer:
Micron
Description:
IC FLASH 128M SPI 54MHZ 8VDFPN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union