List of Tables
Table 1: Signal Descriptions ............................................................................................................................. 7
Table 2: Protected Area Sizes .......................................................................................................................... 11
Table 3: Sectors 63:0 ...................................................................................................................................... 14
Table 4: Command Set Codes ........................................................................................................................ 16
Table 5: READ IDENTIFICATION Data Out Sequence ..................................................................................... 19
Table 6: Status Register Protection Modes ...................................................................................................... 23
Table 7: Power-Up Timing and V
WI
Threshold ................................................................................................. 30
Table 8: Absolute Maximum Ratings .............................................................................................................. 32
Table 9: Operating Conditions ....................................................................................................................... 32
Table 10: DC Current Specifications ............................................................................................................... 33
Table 11: DC Voltage Specifications ................................................................................................................ 33
Table 12: AC Measurement Conditions ........................................................................................................... 34
Table 13: Capacitance .................................................................................................................................... 34
Table 14: AC Specifications ............................................................................................................................ 35
Table 15: AC Specifications, Command Times ................................................................................................ 36
Table 16: Part Number Information Scheme ................................................................................................... 41
M25P128 Serial Flash Embedded Memory
Features
CCMTD-1718347970-10412
m25p_128.pdf - Rev. A 11/16 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
Functional Description
The M25P128 is a 128Mb (16Mb x 8) serial Flash memory device with advanced write
protection mechanisms accessed by a high speed SPI-compatible bus. The device sup-
ports high-performance commands for clock frequency up to 54 MHz.
The memory can be programmed 1 to 256 bytes at a time using the PAGE PROGRAM
command. It is organized as 64 sectors, each containing 1024 pages. Each page is 256
bytes wide. Memory can be viewed either as 65,536 pages or as 16,777,216 bytes.
An enhanced fast program/erase mode is available to speed up operations in factory
environment. The device enters this mode whenever the V
PPH
voltage is applied to the
W#/V
PP
pin.
The entire memory can be erased using the BULK ERASE command, or it can be erased
one sector at a time using the SECTOR ERASE command.
To meet environmental requirements, Micron offers these devices in lead-free and
RoHS compliant packages.
Figure 1: Logic Diagram
S#
V
CC
HOLD#
V
SS
DQ1
C
DQ0
W#/V
PP
Figure 2: Pin Connections: VDFPN
1
2
3
4
V
CC
HOLD#
5
6
7
8
DQ1
V
SS
S#
DQ0
C W#/V
PP
Note:
1. There is an exposed central pad on the underside of the MLP8 package that is pulled in-
ternally to V
SS
, and must not be connected to any other voltage or signal line on the
PCB. The Package Mechanical section provides information on package dimensions and
how to identify pin 1.
M25P128 Serial Flash Embedded Memory
Functional Description
CCMTD-1718347970-10412
m25p_128.pdf - Rev. A 11/16 EN
5
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.
Figure 3: Pin Connections: SO
1
2
3
4
16
15
14
13
V
CC
HOLD#
DNU
DNU
DNU
DNU
DNU
DNU
DNU
DNU
5
6
7
8
12
11
10
9DQ1
V
SS
S#
DQ0
C
W#/V
PP
Notes:
1. DNU = Don't Use
2. The Package Information section provides information on package dimensions and how
to identify pin 1.
M25P128 Serial Flash Embedded Memory
Functional Description
CCMTD-1718347970-10412
m25p_128.pdf - Rev. A 11/16 EN
6
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2016 Micron Technology, Inc. All rights reserved.

M25P128-VME6GB

Mfr. #:
Manufacturer:
Micron
Description:
IC FLASH 128M SPI 54MHZ 8VDFPN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union