STLC5046 Registers addresses
Doc ID 7052 Rev 5 29/51
3.1.16 Transmit Time Slot channel#1 (DXA1)
Addr=14h; Reset Value=00h
EN1=0: Selected transmit time slot on DX output is in H.I.
EN1=1: Selected transmit time slot on DX output is active carrying out the PCM encoded
signal of VFXI1.
T16..0:Define time slot number (0 to 127) on which PCM encoded signal of VFXI1 is carried
out.
If linear mode is selected (LIN=1 of CONF register) the 16 bits will be carried out as follows:
the 8 most significative bits in the programmed time slot, the 8 least significative bits in the
following timeslot.
Example: if T16..T10=00:
Pin-strap value (value 80h):
Referred to FS1.
3.1.17 Transmit Time Slot channel #2 (DXA2)
Addr=15h; Reset Value=00h
EN2=0: Selected transmit time slot on DX output is in H.I.
EN2=1: Selected transmit time slot on DX output is active carrying out the PCM encoded
signal of VFXI2.
T26..0:Define time slot number (0 to 127) on which PCM encoded signal of VFXI2 is carried
out.
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
EN1 T16 T15 T14 T13 T12 T11 T10
TS0 TS1
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
10000000
Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0
EN2 T26 T25 T24 T23 T22 T21 T20
