TMCM-1043 Step/Direction Driver Board

By TRINAMIC Motion Control GmbH 60

TMCM-1043 Step/Direction Driver Board

The TMCM-1043 from TRINAMIC is a simple and compact 1-axis driver board. It allows motor control via step and direction signals, and can be directly controlled via a PLC or by an external step/direction controller board. Handling is quite easy, and no further configuration of the board is required. Nominal supply voltages are 12 VDC and 24 VDC. The drive capability is fixed at 1.1 ARMS. The module provides a very-high-microstep resolution, and TRINAMIC's spreadcycle chopper for smooth motor movement. The TMCM-1043 is equipped with an error output for over-temperature warning and an additional output. The board fits directly on the back of a NEMA17 stepper motor. Easy handling, reliable operation, and a very-competitive price are benefits of this module.

Main Characteristics
  • 2-phase stepper motor driver board
  • Step/direction interface
  • On-board processor for initialization and diagnostic
  • Drive capability: 1.1 ARMS coil current <1.6 A peak current
  • Voltage range: 12 VDC to 24 VDC nominal (9 V to 28 V max.)
  • Microstep resolution: 16 microsteps per full-step input
  • Step multiplier 256 microsteps per full-step output with 16-step multiplier
  • Error output over-temperature
  • spreadCycle™ high-precision chopper
  • Compact size 37 mm x 37 mm x 8.2 mm
  • Temperature range: -30°C to +50°C
  • Mounting 4 holes for M3 screws for NEMA 17 motors

New Products: