InvenSense's MPU-6000 is the world’s first 6-axis, single-chip, integrated sensor solution in a 4 x 4 mm QFN package, including a 3-axis gyroscope plus a 3-axis accelerometer using both SPI an
InvenSense's MPU-6050 is the world’s first 6-axis, single-chip, integrated sensor solution in a 4 x 4 mm QFN package, including a 3-axis gyroscope plus 3-axis accelerometer using an I²C i
Features Tri-Axis accelerometer with a programmable, full-scale range of ±2g, ±4g, ±8g, and ±16g.
ISZ-2510 is a single-chip, digital-output, 1-axis MEMS gyro IC with programmable full-scale ranges which is useful for precision tracking of both fast and slow motions.
MPU-9250 is InvenSense's second-generation 9-axis MotionTracking device for smartphones, tablets, wearable sensors, and other consumer markets.
Features on-chip 16-bit ADCs, programmable digital filters, a precision clock with 1% variation from -40°C to +85°C, and an embedded temperature sensor.
InvenSense's ITG-3400 is a single-chip, integrated triple-axis MEMS digital-output gyroscope with programmable full-scale ranges.
Today’s wearable sports applications require higher than the common ±2000 dps FSR so that critical data is not lost at the point of impact.
InvenSense's ICM-20608 combines a 3-axis gyroscope, and a 3-axis accelerometer in a small 3x3x0.75 mm (16-pin LGA) package.
InvenSense's ICM-20648 is a 6-axis motion tracking device that is ideal for applications looking to utilize on board DMP to run up to 9-axis sensor fusion algorithms on chip to help offload mi
InvenSense's ICM-20602 is a 6-axis motion-tracking device that combines a 3-axis gyroscope and 3-axis accelerometer in a small 3 mm x 3 mm x 0.75 mm (16-pin LGA) package.
InvenSense ICM-20948 is the latest 9-axis which pushes the boundaries of performance providing a low gyroscope rate noise at ±11mdps/√Hz while offering low power and tight sensitivity error.
InvenSense's DK-20648 comprehensive development kit combines a 3-axis gyroscope, a 3-axis accelerometer, and a Digital Motion Processor™ (DMP) designed for rapid evaluation and development of
InvenSense's DK-20602 is a comprehensive development platform for ICM-20602, a high performance 6-axis motion sensor that combines a 3-axis gyroscope and a 3-axis accelerometer.
InvenSense's 7-axis ICM-20789 is a high performance integrated 6-axis inertial and barometric pressure sensor in a 4 x 4 x 1.365 mm LGA package.
InvenSense's DK-20948 is a comprehensive development platform for the ICM-20948.
The development kit comes with necessary software including InvenSense MotionLink, a GUI based development tool and embedded Motion Drivers for ICM-20789
The ICP-101xx pressure sensor measures pressure differences with an accuracy of ±1 Pa, an accuracy enabling altitude measurement differentials as small as 5 cm.
The TDK SmartMotion platform is a comprehensive development kit for InvenSense motion sensor devices. The platform is designed around a Microchip SAMG55 MCU.
InvenSense's ICM-42605 low-power 6-axis MEMS motion sensor is ideal for applications such as IoT, wearable sensors, and smartphones.