Melexis' MLX90333 for 3D position sensor applications features simple and robust magnetic design with Triaxis Hall technology.
Melexis' MLX92212LSE-AAA and MLX92212LSE-ABA Hall-effect sensors built on advanced CMOS processes target operation between 2.5 V and 5.5 V.
Melexis' MLX90217 self-adjusting, gear-tooth IC sensor for automotive camshaft sensing has a short-circuit protected open collector output.
Melexis' MLX90614 infrared thermometer integrates a low-noise amplifier, 17-bit ADC, and powerful DSP unit.
Melexis presents a package option, featuring an integrated decoupling capacitor, for its existing 2-wire Hall-effect switch and latch sensor ICs.
Melexis' MLX90621 InfraRed array delivers a significantly expanded field of view at 30° x 120° and a 4 times faster measurement speed.
Melexis introduces their MLX90363 triaxis programmable position sensor IC featuring SPI for a wide range of sensing applications.
Melexis' MLX91210 integrated current sensor comes with a variety of sensing versions available for industrial, home, and commercial applications.
Melexis’ MLX92231 are unipolar 3-wire hall-effect proximity sensors. These sensors integrate a Hall-effect sensor element with advanced offset cancellation mechanism, a voltage regulator and an op
Melexis Technologies' MLX92215 2nd generation 3-wire Hall effect latch switch sensor with offset cancellation and open-drain driver that are ideal for automotive applications such as e-bikes,
Melexis Technologies' MLX92292 is a 3-wire Automotive Safety Integrity Level (ASIL) B supported latch and switch in a small TSOT-3 and 3-SIP package that is ideal for automotive, health, and i
Melexis Technologies' MLX92251 2nd generation complementary metal oxide semiconductor (CMOS) Hall effect dual latch sensors with two output drivers and a voltage regulator for automotive indus
Melexis Technologies' MLX92232 3-wire programmable hall effect sensors with voltage regulators, output drivers, and EEPROM memory in SIP and TSOT23 packages are ideal for automotive, medical,
The MikroElektronika MIKROE-1987 3D Hall Click™ Board features the Melexis MLX90333 Triaxis Hall sensor.
Melexis’ MLX90242 is a fix-programmed linear Hall effect sensor with a ratiometric analog output.
Melexis’ MLX90248 Omnipolar magnetic switches for power hungry applications such as displays, backlights, and keypad illumination.
Melexis' MLX90393 micropower magnetometer for non-contact HMI applications such as rotary knobs, dials, and joysticks.
Melexis' MLX90632 FIR sensor including the sensor element, signal processing, digital interface, and optics allowing integration into many of applications.
The Melexis MLX90640 is a fully calibrated 32 pixel x 24 pixel IR array in an industry-standard 4-lead TO39 package with a digital interface.
Melexis’ MLX90380 is ideally suited for applications needing fast position sensing readouts.
Rm 2309 23/F,HO King Comm CTR 2-16, Fayuen St, Mongkok Kowloon,HongKong
© 2019 www.omo-ic.com All Rights Reserved;