APM Hexseal's heavy duty Seeloc® washers are perfect for a myriad of sealing requirements where higher torque values are anticipated.
APM Hexseal's HE1015 circuit breaker sealing boots come in high-tear strength silicone rubber construction and are IP66/68-rated.
The APM self-sealing nuts seal to 20,000 psi and fasten where gas or liquids are present or under pressure.
APM Hexseal's push-button boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.
APM Hexseal's E-SEEL® rocker switch boots are molded from RUBRGLAS™ and feature a continuous sealing rib at their base to fully enclose the switch bezel.
APM Hexseal's stainless-steel bushing seal was designed to control potential leakage with its bonded silicone exterior.
APM Hexseal's self-sealing screws are designed to seal to 20,000 psi and are reusable and compatible with all surface finishes.
APM Hexseal's rotary shaft seals for potentiometers feature a molded in mounting-nut and choice of IP66/68 rated models.
APM Hexseal's SEELOC®, high-pressure washers are easy to install and their uniformity and high strength assure repeatable performance.
APM Hexseal's toggle switch boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.
APM's environmental sealing boot mounts on the same switches as APM’s N1030 boot and features a round mounting-nut base.
APM Hexseal offers their high-pressure HEXSEAL SEELOC® washer for applications where a standard, round washer does not provide sufficient environmental sealing.