FTDI offers their development module which utilizes the FT232H USB Hi-Speed single-port bridge chip to handle the USB signaling.
FTDI's USB 2.0 integration reduces LSI development time and supports sub-100 ms hardware reconfiguration.
FTDI's Vinco platform brings together all of the hardware and software needed for rapid development of innovative, cost-effective embedded systems.
FTDI's Vinco Touch-Key Shield mates with the Vinco Development Platform to enable Open Accessory Mode in Android devices.
The UMFT234XD module from FTDI includes USB to UART with four control-bus lines, 3.3 V power out limited to 50 mA, and 5 V safety fuse.
FTDl's FT311D USB Android host IC allows designers to bridge an interface on their peripheral hardware to an Android tablet or smartphone platform over the Android USB device port.
FTDl's FT312D is a USB 2.0, full-speed host IC targeted at providing access to peripheral hardware from an Android platform with a USB device port.
FTDI's FT232H USB2.0 is a single-channel USB-to-UART/FIFO interface device can be configured via EEPROM to use a variety of different serial or parallel interfaces.
FTDI's X-Chip Series device bridges offer more interface options and include an internal MTP memory for configuring and storing the device descriptors.
FTDI's FT2232H is ideal for development purposes to quickly prove functionality of adding USB to a target design.
The FT2232H and FT4232H are FTDI’s 5th generation of USB devices with USB 2.0 high-speed to UART/MPSSE ICs.
FTDI's USB 2.0 Hi-Speed to MPSSE SPI provides a fast, simple way to connect devices with 3.3 V digital interface to USB.
The FT4222H is part of FTDI’s expansive USB offering.
FTDI's UMFT4222EV is a development module which uses their FT4222H.
FTDI's UMFT201XA USB-to-I²C interface includes a battery charger detection feature that allows batteries to be charged with a higher current.
Enabling faster and higher volume data transfers than ever before, the FT60x is the first SuperSpeed USB 3.0 series from FTDI Chip that offers USB access to a wider range of data intensive imaging
FTDI offers their UMFT60xA and UMFT60xX range of evaluation/development modules with HSMC/FMC(LPC) connectors for interfacing FTDI’s FT60x USB 3.0 SuperSpeed IC with external hardware.
FTDI's FT260 is a USB device which supports I²C and UART communication through standard USB HID class interfaces which is natively supported by most operating systems.
FTDI's FT2232H-56Q and FT4232H-56Q are configurable USB 2.0 Hi-Speed (supporting 480 Mbit/s operation) ICs which are available in 56-pin VQFN packages, which results in being easier to place
FTDI's DB9 USB to Digital Modules enable implementation of USB interconnection into legacy equipment without the need for alteration of the enclosure or any noticeable increase in the overall
Rm 2309 23/F,HO King Comm CTR 2-16, Fayuen St, Mongkok Kowloon,HongKong
© 2019 www.omo-ic.com All Rights Reserved;