Honeywell’s 3455RC REDI-TEMP thermostats are offered in a range of pre-set, open-on-rise or close-on-rise temperatures and are available for immediate delivery.
PX2 Series is fully calibrated and compensated for transducer offset, sensitivity, temperature effects and non-linearity using an on-board ASIC.
Honeywell's SS360xx and SS460S sensors are small, sensitive, and versatile devices operated by the magnetic field from a permanent magnet or an electromagnet.
Honeywell's TruStability piezoresistive silicon pressure sensors offering a ratio metric analog output for reading pressure over the specified full-scale pressure and temperature range.
Honeywell's SMART Position Sensors' non-contact design eliminates mechanical failure mechanisms, reducing wear and tear, improving reliability and durability, and minimizing downtime.
Zephyr™ HAF Series sensors provide a digital or analog interface for reading airflow over the specified full-scale flow span and temperature range.
Honeywell's NBP Series pressure sensors are designed for customers who require a simple, cost-effective solution for medical and industrial applications.
The 6DF (six degrees of freedom) sensors are available in two versions - a 2 g accelerometer and a 6 g accelerometer.
HumidIcon sensors eliminate individually testing and calibrating every sensor, helping to reduce manufacturing time and process.
Honeywell's SS360PT / SS460P high sensitivity latching, Hall-Effect sensor ICs with built-in pull-up resistor are small, sensitive, and versatile devices that are operated by the magnetic fiel
Ultra-sensitive devices designed to accommodate a wide range of applications with large air gaps, small magnetic fields, and low power requirements.
Honeywell's rotary position sensors use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator over a set operating range.
Honeywell's ABP series offers a ratiometric analog or digital output for reading pressure over the specified full-scale pressure span and temperature range.
Honeywell’s Model TJE pressure transducers are all-welded stainless steel sensors built for rugged industrial applications that require high accuracy and measurement stability.
Honeywell’s low temperature passive probes, LTP series are designed to meet the industry’s need for sensors that offer fast response, robustness, configurability, cost-competitiveness, and backwar
Honeywell is pleased to announce its high sensitivity latching sensor ICs, VF360NT, VF360ST, that are AEC-Q100 qualified for use in the transportation industry. AEC-Q100 qualification provides enh
Honeywell’s PX3 Series pressure transducers use piezoresistive-sensing technology with ASIC (Application Specific Integrated Circuit) signal conditioning in a brass housing and Metri-Pack 150 elec
Honeywell's 2455RC series is a single pole, single throw, snap-acting, non-adjustable thermostat which may be used in applications such as industrial and electrical equipment.
Honeywell Sensing and Control's 2455RM series is a single pole, single throw, snap-acting, non-adjustable thermostat which may be used in applications such as industrial and electrical equipme
Honeywell’s TBF Series Force Sensors are small flush diaphragm pressure sensors designed for customers who require a simple device for applications where media compatibility and low trapped volume
Rm 2309 23/F,HO King Comm CTR 2-16, Fayuen St, Mongkok Kowloon,HongKong
© 2019 www.omo-ic.com All Rights Reserved;