Broadcom Limited

Broadcom's Qmini delivers technical specifications that are unprecedented at this size which enables tight integration in limited space applications.

With its focal length of 75 mm, Broadcom's Qwave spectrometer offers technical specifications that would normally be found in much larger spectrometers.

The Broadcom Limited AEAT-9000 series are high resolution single turn optical absolute encoders

Broadcom Limited's AEDR-87xx encoders provide great flexibility and versatility in resolution range, along with built in interpolation

Broadcom's AEDT-981x uses integrated Hall sensor elements with complex analog and digital signal processing within a single device.

Broadcom's AEDR-871x and AEDR-872x are 3-channel reflective optical encoder devices that house an LED light source and a photo-detecting circuitry in a compact package.

Broadcom's AFBR-S4N44C013 NUV-HD SiPM features a broad response in the visible light spectrum with high sensitivity towards the blue- and near-UV regions.

The Broadcom APDS-9250 is a low-voltage digital RGB, IR, and ambient light sensor device that converts light intensity to a digital output signal.

Broadcom's APDS-9930 is a digital I²C-compatible interface ambient light sensor (ALS) and proximity sensor with IR LED in a single 8-pin package.

Broadcom's APDS-9306-065 is a low-voltage digital ambient light sensor that converts light intensity to digital signal output with I²C interface.

Broadcom's APDS-9005 is a low-cost analog output ambient light photosensor in a miniature ChipLED lead-free surface mount package.

Broadcom's APDS-9500 provides an imaging-based gesture recognition function with an I²C bus interface in a single 18-pin package.

The AFBR-S50MV85G is Broadcom's multipixel distance and motion measurement sensor based on the optical time-of-flight principle.

Broadcom’s ACHS-7121/ACHS-7122/ACHS-7123/ACHS-7124/ACHS-7125 Hall effect-based linear current sensor IC with 3 kVRMS isolation and low-resistance current conductor.

The ACPL-C79 isolation amplifiers, designed for current and voltage sensing in electronic power converters, feature ±0.5% high gain accuracy.

The ultra-low power 10 MBd ACPL-061L-000E optically coupled optocoupler combines an AlGaAs LED and an integrated high gain photo detector.

The ACPL-M21L optically-coupled logic gate has CMOS output stage and optical receiver input stage with built-in Schmitt trigger.

A member of Broadcom’s third generation of gigabit Ethernet PHYs, the BCM5482S consists of two complete 10/100/1000BASE-T gigabit Ethernet transceivers.

The feature-enhanced 7-port BCM53101 RoboSwitch™ from Broadcom combines all the functions of a high-speed switch system.

Broadcom's ACPL-217, 227 and 247 DC input half-pitch phototransistor optocouplers contain two light-emitting diodes connected inversely parallel and optically coupled to a phototransistor.