Manufacturer
Sensing
  • Fluke 77x Milliamp Process Clamp Meters

    Fluke’s 77x milliamp process clamp meters save time by not breaking the loop on 4 mA to 20 mA signal measurements.

    By Fluke Electronics
  • OPB350/OCB350 Series Tube Liquid Sensor

    The OPB350/OCB350 series from TT Electronics is easy to use requiring only an optical device and power supply.

    By TT Electronics/Optek Technology
  • 2SMPP MEMS Gauge Pressure Sensor

    Omron's 2SMPP MEMS Gauge Pressure Sensor is ultra miniature in size (6.1x4.7x8.2 mm) and offers low power consumption of 0.2 mW.

    By Omron Electronics Inc-EMC Div
  • PaPIRs Motion Sensors

    Motion Sensors 3 mm diameter flat surface lens is possible using Panasonic’s unique Lens Formation Technology for silicon substrates, making the lens operating substantially small compared to othe

    By Panasonic
  • FSR 406 Square Force Sensing Resistor

    Interlink's FSR™ 400 series is part of the single zone Force Sensing Resistor™ family.

    By Interlink Electronics
  • Avalanche Photodiodes

    Luna Optoelectronics' avalanche photodiodes and modules offer high internal gain and improved S/N ratios.

    By Advanced Photonix
  • CdS Photocells

    Luna Optoelectronics' low-cost cadmium sulfoselenide sensors for visible light measurement are designed to sense light from 400-700 nm.

    By Advanced Photonix
  • A1324/5/6 Linear Hall Effect Sensor ICs

    Allegro's A1324/5/6 Hall effect linears are ratiometric sensors that provide a voltage output proportional to the applied magnetic field.

    By Allegro MicroSystems, LLC
  • A119x Switches

    Allegro's A119x series of user-programmable, two-wire, unipolar, Hall effect switches offer improved high voltage transient protection.

    By Allegro MicroSystems, LLC
  • A115x Hall-Effect Unipolar Switches

    Allegro's A115x two-wire, unipolar, Hall-effect switches are factory-trimmed to optimize the accuracy of magnetic switch points.

    By Allegro MicroSystems, LLC
  • ACS759 Series

    Allegro's ACS759 series is optimized for 3.3 V operation and provides economical and precise solutions for AC or DC current sensing.

    By Allegro MicroSystems, LLC
  • ADIS16488 Inertial Sensor

    ADI's ADIS16488 iSensor® MEMS IMU complete inertial system includes a triaxis gyroscope, accelerometer, and magnetometer.

    By Analog Devices Inc
  • ADXRS646 Gyroscope

    ADI's ADXRS646 high performance angular rate sensor offers excellent vibration immunity and complete rate gyroscope on a single chip.

    By Analog Devices Inc
  • AMS22S Series Sensor

    Bourns' AMS22S, non-contacting, single-turn Hall effect sensors feature low mechanical torque with a programmable electrical angle from 10 to 360 degrees.

    By Bourns Inc.
  • L50 Thermal Cut-offs

    L50 Thermal Cut-offs are used to prevent fires caused by abnormal heat generation from circuits and other heat producing electrical products.

    By Cantherm
  • 3455RC REDI-TEMP Series Thermostats

    Honeywell’s 3455RC REDI-TEMP thermostats are offered in a range of pre-set, open-on-rise or close-on-rise temperatures and are available for immediate delivery.

    By Honeywell Sensing and Productivity Solutions T&M
  • PX2 Series Pressure Transducer

    PX2 Series is fully calibrated and compensated for transducer offset, sensitivity, temperature effects and non-linearity using an on-board ASIC.

    By Honeywell Sensing and Productivity Solutions T&M
  • SS360NT / SS360ST / SS460S Sensor ICs

    Honeywell's SS360xx and SS460S sensors are small, sensitive, and versatile devices operated by the magnetic field from a permanent magnet or an electromagnet.

    By Honeywell Sensing and Productivity Solutions T&M
  • TruStability® Board-Mount Pressure Sensors

    Honeywell's TruStability piezoresistive silicon pressure sensors offering a ratio metric analog output for reading pressure over the specified full-scale pressure and temperature range.

    By Honeywell Sensing and Productivity Solutions T&M
  • SMART Position Sensors

    Honeywell's SMART Position Sensors' non-contact design eliminates mechanical failure mechanisms, reducing wear and tear, improving reliability and durability, and minimizing downtime.

    By Honeywell Sensing and Productivity Solutions T&M