BEI Sensors' encoder signal broadcasters accept signals of 5, 12-15, and 24 VDC and provide three output options: VOUT = VIN, VOUT = 5 V, or NPN open collector.
BEI Sensors’ optical isolator modules provide a robust output to receiving electronics, helping eliminate ground loops and reduce signal degradation.
BEI Sensors' H25 incremental and absolute optical encoders are designed for extreme environments: wet, dirty/dusty, ext. temp, and high shaft load.
BEI Sensors’ HS35 3.5” hollow shaft rotary encoder is available in incremental or absolute versions with a rugged metal housing, IP65 rating and dual bearings.
BEI Sensors' 9600 series linear position sensor is ideally suited for use where reliability in a harsh operating environment is a primary consideration.
BEI Sensors' 9850 Gen II series offers an integral right-angle connector receptacle designed to accept industry-standard Packard Electric METRI-Pack™ connectors.
Sensata Sensors' functional safety encoders are ideal for a wide range of industrial applications including robotics, gas and oil, and factory automation.
Sensata – BEI's LP35 is a low profile magnetic encoder designed for measuring precise rotary measurements in rugged, dirty industrial applications.
Sensata BEI's multi-turn encoders are suitable for measuring precise rotary measurement in industrial applications.
Sensata BEI’s ACW4 and TCW4 series 2-part Hall effect sensor assemblies are designed to provide position sensing in industrial applications.