The PA32xxNL series of Sidewinder® Rogowski current sensors features a dynamic range from 0.1 to 1000 A and 100 KHz bandwidth.
Pulse Electronics Corporation, a leading provider of electronic components, introduces a series of high isolation, switch-mode power transformers. These provide a reinforced insulation power suppl
Pulse Electronic's PA4040 integrated choke features a 31 mm x 24.9 mm footprint, making this single CMDM component over 40% smaller than the combined footprint of equivalent CM and DM componen
Pulse Electronics Corporation announces the EP13 Plus platform which delivers 25% more power handling capability than the industry-standard EP13 platform in the same PCB footprint.
Pulse Electronics' PH9400 series power BU's first ever surface-mount (SMT), high-isolation gate drive transformers.
Pulse introduces their PH9385 series of 4 KVrms isolation power transformers, which achieves 12 mm creepage.
Pulse's PH08xxCNL series is their most cost effective line of planar transformers to date.
Pulse Electronics offers their full line of AEC-Q200 qualified 100BASE-TX/T1 and 1000BASE-TX/T1 Ethernet magnetics and common mode chokes for automotive communication applications.
Pulse’s AEC-Q200 qualified transformer is a high reliability product designed for on-board charging and DC/DC or DC/AC power supplies.
The PH9363NL and PH0416NL platforms provide a high isolation as well as powering the gate drive circuitry in a compact and cost effective industrial design.
Pulse's PH9384 series of isolation power push-pull converter transformers with toroid platform SMD are compact and cost-effective.
Pulse Electronics Power's PH9085 series is a line of high-isolation power supply transformers that offer a range of insulation and isolation capabilities.
Pulse Electronics Power's high-frequency wirewound flyback topology transformers are ideally suited for 1.8 W low-power discontinuous mode isolated designs.
Pulse's PA4339 common mode choke series for switch mode power supplies are designed in a low profile to be the most compact power line on the market today.
In Pulse's shielded drum core inductor, an additional ferrite cylinder is located around the outside of the two discs which guides the flux between the discs through the cylinder. The discrete
Pulse Electronics PA4302 series SMT shielded drum core power inductors are RoHS compliant components.
Pulse Electronics PA4301 series SMT shielded drum core power inductors are RoHS compliant components.
Pulse Electronics PA4300 series SMT shielded drum core power inductors are RoHS compliant components.
Pulse Electronics PA4303 and PA4304 series SMT shielded drum core power inductors are components that offer current ratings ranging from 0.32 to 8.5 A.
Pulse's multi-layer ferrite beads are designed to absorb high-frequency noise currents and dissipate it as heat.