MPS's MP100L is a compact, inductorless, good-efficiency, offline regulator for low-power applications.
Monolithic Power Systems MP7752 is an analog input inductorless class-D audio amplifier, which drives stereo speakers in bridge-tied-load configuration.
Monolithic Power Systems' MP1474S is a high-frequency, 2 A, 16 V, synchronous, rectified, step-down, switch-mode converter with built-in power MOSFETs.
Monolithic Power Systems' MP1475S is a high-frequency, 3 A, 16 V, synchronous, rectified, step-down, switch-mode converter with built-in power MOSFETs.
MPS' MP8004 is a 13 W 802.3af PoE powered device interface with a flyback DC/DC converter complete with a 150 V switch.
MPS' MP8865 synchronous step-down converter with I2C interface provides a compact solution to achieve a 6 A continuous output current with excellent load and line regulation.
Monolithic Power Systems introduces their MP3428 17 A, 600 kHz, 20 V, wide input range, synchronous boost converter in a small 3 mm x 4 mm QFN package.
Monolithic Power Systems introduces their MP5092 dual 5.5 V, 7.5 A, programmable current, low RDSON load switch with output discharge function.
Monolithic Power Systems' MP2229 is a high-frequency, synchronous, rectified, step-down, switch-mode converter with internal power MOSFETs.
MPS' MP6532 is a gate driver IC designed for three-phase brushless DC motor driver applications. It is capable of driving three half bridges consisting of six N-channel power MOSFETs up to 60
Monolithic Power Systems' MP023 is a primary side CC/CV flyback controller with high voltage current source and programmable cable compensation.
Monolithic Power Systems' MP6924 is a Fast Turn-off, CCM/DCM Compatible Dual LLC Synchronous Rectifier with low Sleep Mode Current
Monolithic Power Systems' MP6907 is a fast turn-off flyback synchronous rectifier that supports CCM, DCM and QR operation modes.
The Monolithic Power Systems MP2456 0.5 A monolithic, step-down, switch-mode converter with a built-in MOSFET requires a minimum number of external components.
Monolithic Power Systems' MPM3632C is a step-down, regulator module integrated with a synchronous, rectifying power MOSFET, inductor, and three capacitors.
Monolithic Power Systems’ AEC-Q100 qualified step-down converter with programmable frequency and single USB charging port supporting EN_USB fault indication.
The MPS Monolithic Power Systems MP2384 is a fully integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter.
Monolithic Power Systems' MPQ86xx step-down converters with adjustable current limits are fully integrated high-frequency, synchronous, buck converters.
The MP6500 and MP6600 from MPS are stepper motor drivers with a built-in translator and current regulation.
The MP5032 from MPS integrates a USB current-limit switch and charging port identification circuit.