DRV8838 1.8 A Brushed DC Motor Driver

By Texas Instruments 202

DRV8838 1.8 A Brushed DC Motor Driver

Texas Instruments' DRV8838 provides an integrated motor driver solution for cameras, consumer products, toys, and other low-voltage or battery-powered motion control applications. The device can drive one DC motor or other devices like solenoids. The output driver block consists of N-channel power MOSFETs configured as an H-bridge to drive the motor winding. An internal charge pump generates needed gate-drive voltages.

The DRV8838 can supply up to 1.8 A of output current. It operates on a motor power supply voltage from 0 to 11 V, and a device power supply voltage of 1.8 V to 7.0 V. Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout, and over-temperature.

Features
  • H-bridge motor driver
    • Drives a DC motor or other loads
    • Low MOSFET on-resistance: HS + LS 280 mΩ
  • 1.8 A maximum drive current
  • Separate motor and logic supply pins:
    • Motor VM: 0 to 11 V
    • Logic VCC: 1.8 V to 7 V
Applications
  • Cameras
  • DSLR lenses
  • Consumer products
  • Toys
  • Robotics
  • Medical devices

New Products:

DRV8838DSGTDRV8838EVM

Categories

Top