Amphenol Advanced Sensor's Telaire T6713 CO2 series is ideal for applications where CO2 levels need to be measured and controlled for indoor air quality and energy-saving applications, such as demand control ventilation. All units are factory calibrated to measure CO2 concentration levels up to 5000 ppm.
Features |
- An affordable gas sensing solution for OEMs
- Eliminates the need for calibration in most applications with Telaire’s patented ABC Logic™ software. Lifetime calibration warranty
- A reliable sensor design based on 20 years of engineering and manufacturing expertise
|
- Flexible CO2 sensor platform designed to interact with other microprocessor devices
- Small compact design allowing simple product integration
|
Specifications |
|
- Non dispersive infrared (NDIR), gold-plated optics, diffusion sampling (with Telaire's patented ABC Logic self-calibrated algorithm)
- Measurement range: 0 to 5000 ppm
- Dimensions: 1.18 in x 0.787 in x 0.34 in (30 mm x 20 mm x 8.6 mm)
- Accuracy: 400-5000 ppm ± 30 ppm ± 3% of reading
- Temperature dependence: 5 ppm per degrees Celsius or 0.5% of the reading per degrees Celsius, whichever is greater
- Stability: < 2% of FS over life of sensor (15 years typ.)
- Pressure dependence: 0.13% of reading per mm Hg
- Calibration interval: not required
- Response Time: < 3 minutes for 90% step change (typ.)
- Signal update: every 5 seconds
- Warm up time
- < 2 minutes (operational)
- 10 minutes (max. accuracy)
|
- Operating conditions
- 14°F to +140°F (-10°C to +60°C)
- 0 to 95% RH, non-condensing
- Storage conditions: -22°F to +158°F (-30°C to +70°C)
- Digital
- I2C slave up to 100 kHz
- UART at 19200 baud with Modbus support
- Two options of PWM output mode
- Cycle period 1002 ms (~1 Hz)
- 40 us (25 kHz)
- Power supply requirements
- 4.5 VDC to 5.5 VDC
- Peak 200 mA (155 mA typ.)
- Average 25 mA (20 mA typ.)
- Interface connections designed for 6-pin male header with 0.1 in (2.54 mm) spacing; header not included
|