Delivering cutting-edge current density at 23.0 A per circuit through a split-box terminal design, Molex's Mega-Fit power connectors incorporate the option for tin-plated contacts to enhance design flexibility while providing significant cost savings.
Features and Benefits
- Power-dense design with high-current terminals, tight pitch and row spacing
- Terminal interface with six independent points of contact (split-box terminal design)
- Tin-plated contacts now available
- Extended barrel conductor crimp
- Sacrificial contacts
- Fully isolated header pins and receptacle terminals
- Positive locking housing
- Backshells available in 94V-0-compliant and glow-wire-capable materials
- Hermaphroditic two-piece backshell
- Makes assembly and stocking easy; reduces bill-of-materials (BOM)
- Affords application flexibility to provide strain relief
- Provides more power per linear and square millimeter than other midrange power products in the industry
- Offers redundant, secondary current paths for long-term performance and reliability
- Enhances design flexibility to provide significant cost savings
- Provides extremely strong terminal-to-wire retention for long-term reliability
- Allows system to be “hot plugged” at 48 V/23.0 A up to 30 cycles
- Protects against potential damage during handling and mating
- Ensures secure retention when receptacle and header are mated
- Delivers an audible click to provide feedback that connector is fully mated
Applications
- Consumer/home appliance
- Washers and dryers
- Heaters and air conditioners
- Networking and telecommunication
- Hubs and servers
- Power supplies and distribution
- Industrial
- Machinery and heavy equipment
- Lighting and automation
- Commercial vehicle
- Unsealed electronic control modules
- Power converters