Molex's EXTreme Ten60Power hybrid power and signal connectors are designed for board-to-board, wire-to-board, and panel-to-board applications and provide fast response times and easy-to-configure modules. They are available in 2 through 6 power circuits: 0-, 12-, 18-, and 24-signal circuits.
They provide 50.0 A of current per blade, 260.0 A per linear inch. They also provide both 8 AWG to 16 AWG power receptacle terminals, and 22 AWG to 28 AWG signal receptacle terminals. Also, they provide Last-Mate-First-Break (LMFB) or First-Mate-Last-Break (FMLB) capability.
Features
- Low-profile design with only 10 mm height enhances system airflow
- Standard power blades are rated up to 60.0 A per blade at a 30°C T-rise
- Provides 260.0 A per linear inch, ensuring maximum current-to-length ratio
- Available in a variety of module types to accommodate virtually any design application:
- 1 through 9 circuit split-blade power modules
- 1 through 10 circuit standard power blade modules
- 6 through 60 circuit signal modules
- Either end-mount or top-mount guidance
- Modular assembly means that additional circuit configurations can be achieved
- Right-angle and vertical orientations available, which accommodate either coplanar or perpendicular applications
- Rated for resistance to arcing in hot-pluggable applications for use in a wide range of applications
- Robust, high-current contact blades in DC (5.5 mm) and AC (7.5 mm) power pitches provides design flexibility
- Multiple mating levels available on power and signal contacts
Split-Blade Power Modules (1 through 9)
- Isolated split mated contacts with dielectric LCP plastic (each split-blade terminal carries a 30.0 A current rating at 30°C T-rise)
- Shortens the distance between energized power contacts resulting in faster response times, lower overall impedance, and capacitance benefits
- Increases power contact granularity if the customer does not need the standard, full 60.0 A current rating for all power contacts
- Modular design; custom hybrid assemblies based on standard power and signal components
- Integrates into hybrid EXTreme Ten60Power assemblies along with standard power modules and signal modules to meet customers' specific requirements
3-Row Signal Module (original version)
- 2.54 mm by 2.54 mm pitch signal spacing provides design flexibility
5-Row Signal Module (high-density version)
- 2.00 mm by 1.65 mm pitch signal spacing
- Saves over 10.00 mm of space when using a 25-signal module versus the original EXTreme Ten60Power High-Current connector with 24-signal modules. For use in more critical, space-constrained applications
- Through-hole versions available in right-angle plug and receptacles; press-fit versions available in right-angle plug and receptacles and vertical receptacles, which provide design flexibility
Applications
- Datacommunication equipment
- High-end servers
- Rack servers
- Consumer electronics
- Appliances
- Entertainment systems
- HVAC
- Telecommunication equipment
- Hubs
- Cellular base stations
- Switches
- Routers