PSoC® 6 Wireless Sensor Network IoT Dev Platf

By Cypress Semiconductor Corp 47

PSoC® 6 Wireless Sensor Network IoT Dev Platf

PSoC 6 is Cypress Semiconductor’s MCU family purpose-built for the IoT. PSoC 6 leverages a dual-core microcontroller architecture, with Arm® Cortex®-M4 and Cortex-M0+ cores integrated onto a single chip. With low power, flexibility, and security designed in, PSoC 6 enables next-generation IoT designs.

To get started designing with the PSoC 6 MCU, the PSoC 6 BLE Pioneer Kit (CY8CKIT-062-BLE) is available. To enable even more dynamic IoT system design, SparkFun has created a PSoC 6 compatible add-on shield that is only available at Digi-Key. Engineers can now design with PSoC 6 and multiple wireless connectivity options, the SparkFun Qwiic Sensor system, and more.

In the age of the IoT, developers all over the world are looking for low-power methods of gathering real-world sensor data to enable end users with intelligent insights. This challenge is made easier by leveraging this joint platform from Cypress, SparkFun, and Digi-Key.

To allow designers to quickly get started with this platform, SparkFun and Cypress have put together a few example projects detailed in the Hookup Guide. As the SparkFun shield is actually compatible with all PSoC MCU Pioneer Kits, an application example has been created demonstrating a smart home/environmental monitoring IoT system.

A sensor node is created leveraging PSoC 4 BLE, the IoT add-on shield, and a Qwiic environmental sensor. Data is then transmitted via BLE to a PSoC 6 BLE Pioneer Kit, which also has the IoT add-on shield and is leveraging an Xbee Wi-Fi module. The environmental sensor data is then transmitted via Wi-Fi to ThingSpeak™ cloud IoT analytics service.

PSoC 6 BLE Pioneer Kit Features SparkFun Arduino-Compatible IoT Add-On Shield Features
  • PSoC 63 MCU with BLE 5.0 connectivity
  • CapSense® linear slider, touch buttons, and proximity sensors
  • EZ-PD™ CCG3 Type-C™ system for power delivery
  • E-ink display shield board
  • On-board 512 MB high speed quad-SPI NOR Flash
  • SparkFun Qwiic connect system allowing PSoC MCUs to interface with a wide range of Qwiic sensors
  • Xbee™ module interface to support any wireless upload protocol
  • Micro SD card slot for data logging
  • Breakout of all available PSoC MCU I/O for easy user access
Resources
  • Pioneer IoT Add-On Shield Hookup Guide
  • Schematic
  • Article: Use Add-On Boards to Quickly Build a Powerful IoT-Based Greenhouse LED Lighting and Sensor System
  • Eagle Files
  • PSoC 6 MCU Community
  • XBee Wi-Fi User Guide
  • GitHub

EEWiki Articles

  • Using the CMSIS DSP Library in a ModusToolbox Project
  • Sampling Audio at 44.1 kHz with the CY8CPROTO-062-4343W Board

Click here to quickly add to cart the PSoC 6 BLE Pioneer Kit (CY8CKIT-062-BLE) and SparkFun Arduino-Compatible IoT Add-On Shield (DEV-14531). If you’re interested in the smart home/environmental monitoring IoT system example project and ready to try out at home, click here to add the BOM to your cart.

Categories

Top