NXP Semiconductors' Layerscape LS1012A, LS1043A, and LS1088A provide a wide range of sizes and performance options based on Arm Cortex-A53 core. The LS1012A processor, optimized for battery-backed or USB-powered, space-constrained networking and IoT applications, integrates a single Arm Cortex-A53 core running up to 1 GHz with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance in an ultra-small size envelope at 1 W typical power dissipation.
The LS1043A deliver greater than 10 Gbps of performance in a flexible I/O package supporting fanless designs. This SoC is a purpose-built solution for small form-factor networking and industrial applications with BOM optimizations for economic low layer PCB, lower cost power supply and single clock design.
The LS1088A has the advanced, high-performance data path and network peripheral interfaces required for wireless access points, networking infrastructure, intelligent edge access, including virtual customer premise equipment (vCPE) and high-performance industrial applications.
LS1012A Features |
|
LS1012A Applications |
- 1x Arm Cortex-A53
- Up to 1 GHz frequency
- Typical sub-1 W
- 16-bit DDR3L memory controller
- 1x PCIe® Gen 2
- 1x SATA 3.0
- 1x USB 3.0 + PHY
- 1x USB 2.0 + ULPI
- 1x SPI, 2x I2C
- 2x SD3.0 / SDIO / eMMC
- 2x UART
- 5x I2S
|
|
- Personal/consumer NAS
- Smart home gateway
- Building and factory automation
- Entry-level broadband Ethernet gateways
- Ethernet drives for data center storage
- Mobile NAS (battery powered)
- Trust-enabled IoT gateways
- Interface board for optical processing
- Inventory management platform
- Transformer terminal (TTU)
|
LS1043A Features |
|
LS1043A Applications |
- 4x Arm Cortex-A53
- Up to 1.6 GHz frequency
- DDR 3L/4
- Up to seven 1x GbE or 1x 10GbE and five x GbE
- 3x PCIe Gen 2
- 1x SATA 3.0
- 3x USB 3.0 + PHY
- QuadSPI
- Quad I²C
- uQE
- Queue manager
- Buffer manager
- Packet engine
|
|
- Wireless/telematics security gateway
- Industrial gateway
- Branch router
- Broadband home gateway
- Integrated services gateway
- IP-PBX
- vCPE/uCPE
- Wireless LAN (WLAN) access point
- Power grid process monitor
- Motion control and machine vision
|
LS1088A Features |
|
LS1088A Applications |
- 8x Arm Cortex-A53
- Up to 1.6 GHz frequency
- 1 MB L2 cache
- 1x 64 bit DDR4 up to 2.1 GT/s
- Two 64-bit DDR4 running up to 2.1 GT/s
- 2x 10 GbE + 8x 1 GbE
- 10 Gb/s SEC crypto acceleration
- 2x USB 3.0 + PHY
- 2x TDM/HDLC interfaces
- uQE
- Advanced IO processor
- WRIOP
- Queue manager
- Buffer manager
- Packet engine
|
|
- Enterprise routers
- Industrial secure gateway
- Linecard controllers
- Open network switch
- TOR/chassis switch
- iNIC
- Intelligent edge access
- NFV solutions
- Virtual CPE
- Wireless LAN (WLAN) access point
|