MCP6D11 Operational Amplifiers

MCP6D11 Operational Amplifiers

The MCP6D11 from Microchip Technology is a low noise, low-distortion differential I/O amplifier optimized for driving high-performance 14- and 16-bit SAR ADCs, such as the MCP331x1D ADC family. Featuring a low 5.0 nV/√Hz input-referred voltage noise and distortion of less than -116 dBc with an input signal of up to 100 kHz (2 VP-P), the MCP6D11 consumes only 3.5 mW of quiescent power on a 2.5 V supply. For power sensitive applications, a power-down function reduces the power consumption to less than 13 µW.

The MCP6D11 is the ideal interface solution for converting single-ended, ground-referenced signal sources into a fully differential output signal required to preserve the high performance of today's ultra-low distortion, single-supply ADCs.

Features
  • Low power
    • IQ: 1.4 mA
    • Supply voltage range: 2.5 V to 5.5 V
  • Gain-bandwidth product: 90 MHz
  • Slew rate: 25 V/µs
  • Low noise: 5.0 nV/√Hz, f = 10 kHz
  • Low distortion (2 VP-P, 10 kHz):
    • HD2: -138 dBc
    • HD3: -137 dBc
  • Fast settling: 200 ns to 0.01%
  • Low offset: 150 µV max.
  • Power-down function
  • Input Vcm-Range includes negative rail
  • Rail-to-rail output
  • Small packages: MSOP-8, 3 mm x 3 mm QFN-16
  • Extended temperature range: -40°C to +125°C
Typical Applications
  • Precision ADC drivers:
    • 14-/16-/18-bit SAR ADCs
    • Delta-Sigma ADCs
  • Single-ended to differential conversion
  • Differential active filter
  • Line drivers
Manufacturer