Texas Instruments' DP83867 is a physical layer transceiver with integrated PMD sublayers to support 10BASE-Te, 100BASE-TX, and 1000BASE-T Ethernet protocols.
By Texas Instruments 41
PI3HDX511F from Pericom is a low power HDMI 1.4b ReDriver and DisplayPort dual mode level shifter supporting 3.4 Gbps data rate with 48-bpp deep color support.
By Diodes Incorporated 55
Pericom Semiconductor’s PI3EQX1204-C is a SAS3, 4 differential channels ReDriver.
By Diodes Incorporated 33
Pericom Semiconductor’s PI3EQX8904 provides programmable linear equalization, output swing and gain, by either pin strapping option or I²C control.
By Diodes Incorporated 64
Pericom Semiconductor’s PI3DPX1203 is DisplayPort compliant, 8Gbps link speed, single differential channel Linear ReDriver with Link Training transparent mode.
By Diodes Incorporated 49
Vishay’s DG250x are 200 Ω precision monolithic quad single-pole single-throw (SPST) analog switches in the ultra-compact WCSP 4 bump by 4 bump array package.
By Vishay/Siliconix 116
Maxim's IO-link sensors enable this revolution by bringing intelligence and control down to the factory floor.
By Maxim Integrated 79
NXP’s PCAL6524 is a 24-bit I/O expander that provides remote I/O expansion for most microcontroller families via the Fast-mode Plus (Fm+) I²C bus interface.
By NXP Semiconductors 118
Texas Instruments' AFE4400 is a fully integrated analog front-end (AFE) suited for pulse oximeter applications and is a very configurable timing controller.
By Texas Instruments 45
Texas Instruments' TUSB321AI allows USB Type-C ports with the configuration channel logic needed for Type-C ecosystems and operates over a wide supply range.
By Texas Instruments 73
Texas Instruments' TMDS171 is a digital video interface (DVI) or high-definition multimedia interface (HDMI) retimer that supports signaling rates up to 3.4 Gbps.
By Texas Instruments 69
Cypress’ CY8CKIT-026 CAN and LIN shield kit plugs into any Arduino base boards, enabling it to be used along with all PSoC 4 Pioneer development kits.
By Cypress Semiconductor Corp 107
FTDI's FT260 is a USB device which supports I²C and UART communication through standard USB HID class interfaces which is natively supported by most operating systems.
By FTDI, Future Technology Devices International Ltd 129
Intersil introduces their ISL32458E/59E differential transceivers which are ±60 V fault protected, with 3.3 V to 5 V, ±20 V common-mode range, and have RS-485/RS-422 transceivers with ca
By Renesas 58
Texas Instruments' TCAN33x family of CAN transceivers is compatible with the ISO 11898 high-speed controller area network (CAN) physical layer standard.
By Texas Instruments 40
Texas Instruments' TCAN1042 CAN transceivers meets the ISO1189-2 high-speed CAN physical layer standard and are designed for use in CAN FD networks up to 2 Mpbs.
By Texas Instruments 89
FTDI's FT2232H-56Q and FT4232H-56Q are configurable USB 2.0 Hi-Speed (supporting 480 Mbit/s operation) ICs which are available in 56-pin VQFN packages, which results in being easier to place
By FTDI, Future Technology Devices International Ltd 60
Texas Instruments' MUX36xxx are modern CMOS analog multiplexers that switch signals from high input impedance sources with minimal error.
By Texas Instruments 54
Vishay introduces a 1.4 mm by 1.8 mm miniQFN10 package with an ultra-thin 0.35 mm profile, providing a space-saving alternative to larger miniQFN10 and WCSP devices.
By Vishay/Siliconix 35
Microchip's MGC3030 / MGC3130 controllers enable 3D gesture control in almost any product, such as wireless speakers, radios, light switches, and remote controls.
By Microchip Technology 61