Broadcom's BCM89501 device is a fully integrated BroadR-Reach multilayer switch that supports automotive qualification (AECQ100) for in-car networking applications.
By Broadcom Limited 77
Broadcom's BCM89810 automotive Ethernet transceiver performs all of the physical layer functions for BroadR-Reach encoded Ethernet packets over single-pair unshielded twisted-pair copper wire,
By Broadcom Limited 80
Maxim Integrated offers a high-speed, full-duplex RS-485/RS-422 transceiver designed for long cables.
By Maxim Integrated 127
Texas Instruments' TIOS101 digital sensor output drivers with integrated surge protection are robust 24 V digital drivers for industrial sensors.
By Texas Instruments 64
Texas Instruments' THVD1500 is a low-power, half-duplex RS-485 transceiver suitable for data transmission up to 300 kbps.
By Texas Instruments 57
The wide operation voltage range, low resistance, and high bandwidth of Vishay Siliconix's DGQ2788A make it ideal for a variety of design needs, simplifying the BOM.
By Vishay/Siliconix 102
Vishay's DG3257 is ideal for analog and digital signal switching in portable consumer and medical devices, and achieves low resistance of 5 Ω at 4.2 V.
By Vishay/Siliconix 129
Maxim's MAX2250xE ESD-protected RS-485/RS-422 transceivers are available in 8TDFN-EP, 10TDFN-EP, or 12TDFN-EP packaging.
By Maxim Integrated 94
Maxim offers a wide selection of interface ICs including circuits for interconnection.
By Maxim Integrated 112
Texas Instruments' TUSB21x USB 2.0 high-speed signal conditioners restore the signal integrity of a USB high-speed channel up to the USB receptacle.
By Texas Instruments 107
Texas Instruments' THVD15xx 5 V RS-485 transceivers are available in two speed grades suitable for data transmission up to 500 kbps and 50 Mbps respectively.
By Texas Instruments 58
Analog Devices’ fido5100/fido5200 Ethernet switches are personalized to support the desired protocol by firmware that is downloaded from a host processor.
By Analog Devices Inc 38
ADI's ADGS5414 exhibits break-before-make switching action, allowing the use of the device in multiplexer applications with external wiring.
By Analog Devices Inc 39
Texas Instruments' MUX36S16 and MUX36D08 are 36 V, low-capacitance, low-leakage-current, precision analog multiplexers.
By Texas Instruments 103
Texas Instruments' TPS25820 and TPS25821 devices are highly integrated USB Type-C source controllers with a built-in power switches.
By Texas Instruments 45
Diodes' PI5USB30213A and PI5USB31213A are USB3.1 Gen 1 and USB3.1 Gen 2 Type-C™ controllers with configuration channel logic and 5 V VCONN sourcing.
By Diodes Incorporated 60
Diodes Incorporated offers a number of products for the emerging USB Type-C™ connector standard for ultra-mobile notebooks, tablets, and smartphones.
By Diodes Incorporated 46
Texas Instruments' TS5USBC400 dual 2:1 USB 2.0 multiplexers/demultiplexers are ideal for mobile and space constrained applications.
By Texas Instruments 48
Diodes' PI3EQX1001 optimizes performance over various physical mediums by reducing inter-symbol interference through programmable equalization and flat gain.
By Diodes Incorporated 77
Texas Instruments' TIC12400 is ideal for many types of data acquisition systems with its integrated ADC, serialization, and digital communication capabilities.
By Texas Instruments 440