Circuit Protection

Categories

Circuit Protection
  • Fusible Through-Hole Resistors

    Yageo offers a wide range of metal film and wire wound fusible through-hole resistors.

    By Yageo 640

  • CGA Series MLCC Capacitors

    TDK's CGA series multilayer ceramic chip capacitors (MLCCs) are qualified to the automotive industry’s Q200 test standard.

    By TDK Corporation 57

  • High Capacitance MLCCs (0402 X5R 1 µF to 1206

    Murata's ceramic chips offer better reliability, electrical performance, and allow design engineers to downsize designs with various package options.

    By Murata Electronics 166

  • PN-DESIGNKIT-57 PortNote® Solution and Design

    Bourns PortNote® solution illustrates how a polymer PTC can protect the DC bus during short circuit testing as recommended by USB 3.1 Section 11.4.1.1.1.

    By Bourns Inc. 63

  • Click™  Boards

    MikroElektronika MikroBUS™ click boards are plug-in play solutions designed to revolutionize the way users add new functionality to development boards.

    By MikroElektronika 78

  • Self-Sealing Nuts

    The APM self-sealing nuts seal to 20,000 psi and fasten where gas or liquids are present or under pressure.

    By APM Hexseal 188

  • Pushbutton Sealing Boots

    APM Hexseal's push-button boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.

    By APM Hexseal 198

  • Rocker Switch Boots

    APM Hexseal's E-SEEL® rocker switch boots are molded from RUBRGLAS™ and feature a continuous sealing rib at their base to fully enclose the switch bezel.

    By APM Hexseal 195

  • Panel Bushing Switch Seal

    APM Hexseal's stainless-steel bushing seal was designed to control potential leakage with its bonded silicone exterior.

    By APM Hexseal 196

  • Self-Sealing Screws

    APM Hexseal's self-sealing screws are designed to seal to 20,000 psi and are reusable and compatible with all surface finishes.

    By APM Hexseal 189

  • Rotary Shaft Seals

    APM Hexseal's rotary shaft seals for potentiometers feature a molded in mounting-nut and choice of IP66/68 rated models.

    By APM Hexseal 192

  • Air and Liquid-Tight Self-Sealing Washers

    APM Hexseal's SEELOC®, high-pressure washers are easy to install and their uniformity and high strength assure repeatable performance.

    By APM Hexseal 172

  • Toggle Switch Sealing Boots

    APM Hexseal's toggle switch boots are molded from a high tear-strength silicone rubber bonded to a built-in mounting nut.

    By APM Hexseal 169

  • Fuse Clip 5 mm x 20 mm High Power 20 A 600 V - 100

    The 100020 series from Littelfuse is compliant with the 20 A rated current and 600 V rated voltage application requirement for 5 mm x 20 mm fuses.

    By Littelfuse Inc 159

  • Flexo® Anti-Stat Braided Sleeving

    Techflex introduces their Flexo® anti-stat conductive carbon infused nylon which is designed for static protection and shielding in the most sensitive applications.

    By Techflex 75

  • Scotch® Grounding Braid 25T

    3M's Scotch® grounding braid is a flat, tin-plated copper braid conductor offering low electrical resistance connections and strain relief.

    By 3M 188

  • PCB Design Tools for Optocouplers

    Vishay Semiconductor Optoelectronics' optical sensors, optocouplers, solid-state relays, and MOSFET driver models streamline the design of optoelectronics.

    By Vishay Semiconductor / Opto Division 92

Top