ADI’s AD623 is a single- or dual-supply instrumentation amplifier for rail-to-rail output with a voltage range of 3 V to 12 V.
By Analog Devices Inc 37
ADI’s AD797 are low distortion and low noise operation amplifiers for pre-amplification, sonar, and seismic detection.
By Analog Devices Inc 41
ADI’s AD633 is a four quadrant analog multiplier in either an 8-PDIP or 8-SOIC package.
By Analog Devices Inc 67
ADI’s OP275 combines both bipolar and JFET transistors for amplification and accuracy in an audio op amp.
By Analog Devices Inc 51
Analog Devices' OP177 ultraprecision op amps feature one of the highest precision performance of any operational amplifier currently available.
By Analog Devices Inc 57
Texas Instruments' LM386 are mono, low voltage power amplifiers with internal gain that can be used in a variety of applications.
By Texas Instruments 125
Analog Devices' AD8221 is a high performance precision instrumentation amplifier that is gain programmable and an excellent choice for medical, industrial, and precision applications.
By Analog Devices Inc 59
Texas Instruments' INA180 amplifies the voltage developed across a current-sensing resistor as current flows through the resistor to the load or ground.
By Texas Instruments 47
Texas Instruments' INA181 are bidirectional, 26 V, common-mode, current-sensing amplifiers used in both low-side and high-side configurations.
By Texas Instruments 92
ADI’s AD627 is a single and dual voltage supply instrumentation amplifier for rail-to-rail output.
By Analog Devices Inc 83
Texas Instruments' TAS5782M integrates four main building blocks together into a single cohesive device that maximizes sound quality, flexibility, and ease-of-use.
By Texas Instruments 61
Analog Device's instrumentation amps are ideal for handheld, portable, battery applications.
By Analog Devices Inc 79
Texas Instruments' OPA167x devices are unity-gain stable, dual- and quad-channel operational amplifiers with low noise and distortion.
By Texas Instruments 62
Texas Instruments' INA240 current-sense amplifiers offer a wide common-mode range, precision, zero-drift topology, and excellent common-mode rejection ratio (CMRR).
By Texas Instruments 83
The ADA4522-2 from ADI is a dual channel, zero drift op amp with low noise and power, ground sensing inputs, and rail-to-rail output.
By Analog Devices Inc 37
Analog Devices LTC’s LTC2185 is a 16-bit, 2-channel simultaneously sampling analog-to-digital converter (ADC).
By Analog Devices Inc 29
Microchip’s MCP6001 and MCP6002 series of op amps offer a low-cost solution suitable for general purpose applications such as signal amplification, sensor buffer and driving an analog-to-digital c
By Microchip Technology 87
Analog Devices' AD822A/AD822B op amps have a capacitive load drive of 350 pF, G+=1 and have a low output current consumption of 15 mA (minimum). The AD822 is ideal for battery/portable and tes
By Analog Devices Inc 48
Analog Devices’ AD8605/AD8606/AD8608 have low offset voltage (80mA), low input voltage (2.7 V to 5.5 V) current noise (8 nV/√Hz) and wide bandwidth 10 MHz.
By Analog Devices Inc 38
Analog Devices' AD820 op amp can be powered either by a single (5 V to 36 V) or dual (±2.5 V to ±18 V) voltage supply with a 700 µA current supply.
By Analog Devices Inc 57