TI's family of single-channel 500 MSPS DACs have a maximum rate of 500 MSPS, are pin-compatible family, and have power dissipation of 375 mW.
By Texas Instruments 45
The Tiva C development kit from TI has a set of features that make it a compact and versatile evaluation platform for the Tiva C series TM4C123G ARM® Cortex™-M4-based MCU.
By Texas Instruments 128
TI's LM3017 series is a versatile low-side controller that is used to easily implement boost conversions and draws very low current in shutdown mode.
By Texas Instruments 96
TI's LMP92064 series sensors feature two simultaneous sampling 12-bit ADCs and have an operating temperature range of -40°C to +105°C.
By Texas Instruments 66
Real-time control MCUs from TI with nearly fully-automated motor-parameter identification that saves months and months of designing time.
By Texas Instruments 62
TPL5000 timers from TI are a long-term timer IC for applications with low-power and/or interrupt-driven applications.
By Texas Instruments 43
TI's INA199A1 series of voltage output current shunt monitors are highly accurate and have a wide common-mode range of -0.3 to 26 V.
By Texas Instruments 73
TI's DRV8303 gate-driver IC has there half-bridge drivers that can drive a high-side N-type MOSFET and a low-side N-type MOSFET at the same time.
By Texas Instruments 132
Learn about the TPS92411 Floating Switch from TI. A 100 V floating MOSFET switch can create a size and cost saving LED drive solution with little ripple current.
By Texas Instruments 149
MSP430F524x series of MCUs from Texas Instruments are ultra-low power and can prolong the lifetime of batteries in portable devices when paired with extensive low-power models.
By Texas Instruments 46
TI's LMK00725 fanout buffers have low jitter and phase noise floor, making them ideal for applications needing high-performance and repitition.
By Texas Instruments 61
TI's Tiva™ C series MCU's have rich communication features to create highly-connected designs that provide real-time controlled performance and power.
By Texas Instruments 115
TI's TPS24750 combines a hot-swap controller and a power MOSFET to provide highly integrated load protection for 2.5 V to 18 V applications.
By Texas Instruments 50
TIs' high-speed passive switch, HD3SS6126 is used to route signals from one source to two destinations (or vice-versa) in USB 3.0 applications.
By Texas Instruments 87
Texas Instruments' DRV411 series condition InSb Hall elements in closed-loop current sensor modules.
By Texas Instruments 83
TI's fanout buffer is a high performance, power efficient, and versatile solution for replacing fixed-output buffer devices while increasing the timing margin.
By Texas Instruments 105
TI's TPS53915 converters have a a small size but feature high performance MOSFETs, high accuracy, and an integrated boost switch.
By Texas Instruments 96
TI's OPA172 operational amplifier series can be used with the OPAx171 and OPAx170 to provide bandwidth, noise, and power options for a variety of applications.
By Texas Instruments 109
The TI ADS8319 ADC's power consumption is directly scaled with speed, making it optimized for low power consumption for low speed applications.
By Texas Instruments 88
TI's DS125DF111 retimer include CTLE and CDR which help to elongate transmission distance, reset jitter budge, and retime high sped serial data.
By Texas Instruments 44