Texas Instruments

Categories

Texas Instruments
  • TS3USBA225 High Speed Audio Switch

    TI's multiplexer's design allows a designer to use a common connector for audio and USB data.

    By Texas Instruments 100

  • TS3DDR3812 12-Channel 1:2 MUX/DEMUX Switch

    TI's TS3DDR3812 series offers a low and flat ON-state resistance and low I/O capacitance, allowing it to have a bandwidth of 1.675 GHz.

    By Texas Instruments 352

  • UCC27210 High/Low Side Driver

    Offered in a 4 A source, 4 A sink, and pull-up and pull-down resistance of 0.9 Ω, UCC27210 drives large power MOSFETs with little switching loss.

    By Texas Instruments 50

  • UCC25230 PWM Converter

    TI's UCC25230 PWM converter is a highly integrated isolated forward flyback used for high density and DC-to-DC converter applications.

    By Texas Instruments 96

  • TXS4555 SIM Card Solution

    A complete solution used for interfacing wireless baseband processors with a SIM card needed to store I/O in mobile applications.

    By Texas Instruments 108

  • UCC27531 Single Channel Driver

    A universal, single, low-side driver that are suitable for applications with low-to-high frequency and low-to-high power.

    By Texas Instruments 56

  • UCD9090 Sequencer

    Includes 23 GPIO pins that serve as power supply enables, power-on reset signals, external interrupts, cascading, and other system functions.

    By Texas Instruments 141

  • AM3358™ Sitara MCUs

    Texas Instruments' AM3358™ Sitara MCUs contain three subsystems: an ARM Cortex-A8 based MPU, POWERVR SGX graphics accelerator subsystem, and PRU-ICSS.

    By Texas Instruments 55

  • THS4531/31A Fully-Differential Op Amps

    THS4531/31A op amps are useful where power consumption and dissipation are critical, such as data acquisition systems and high density applications.

    By Texas Instruments 58

  • ISO7141CC Digital Isolator with Noise Filter

    TI's ISO7141CC series are quad-channel isolatosr with three forward- and one reverse-direction channels which are commonly used for noise-prone applications.

    By Texas Instruments 50

  • Industrial Communication Winning Solution

    TI's AM3359 ICE development platform is a winning solution for the Sitara AM335x ARM® Cortex™-A8 processor family.

    By Texas Instruments 30

  • Hercules RM42x LaunchPad Evaluation Kit

    Hercules RM42x LaunchPad from TI is a cost-effective evaluation platform which helps users begin and evaluate developments on the Hercules MCU system.

    By Texas Instruments 41

  • Hercules TMS570LS04x/03x LaunchPad Evaluation Kit

    Hercules LaunchPad evaluation kit is a pre-programmed and cost-efficient evaluation platform which helps users begin to develop the Hercules MCU platform.

    By Texas Instruments 367

  • ADS1220 ADC for Small Signal Sensors

    Texas Instruments’ ADS1220 are precise 24-bit ADCs with low current consumption and noise and have a wide supply range.

    By Texas Instruments 63

  • DLP® LightCrafter™ 4500

    DLP® LightCrafter™ 4500 from Texas Instruments is a flexible light-steering solution that offers high brightness and resolution.

    By Texas Instruments 80

  • LDC1000 Inductance to Digital Converter

    TI's LDC1000 series is the first inductance-to-digital converter and offers higher performance and reliability at a low cost.

    By Texas Instruments 45

  • TPS7A8300 Voltage Regulator

    Highly accurate voltage regulators with remote sensing, and soft-start capabilities used to power high-current, low-voltage applications.

    By Texas Instruments 105

  • bq24192 USB/Adapter Chargers

    TI's bq24192 USB/adapter chargers are highly integrated and efficient for use in portable applications such as tablets.

    By Texas Instruments 81

  • bq51051B Wireless Power Li-Ion Charger Receivers

    bq51051B series from TI provides highly efficient AC/DC power conversion and also provides digital controller needed for safe Li-Ion and Li-Pol battery chargers.

    By Texas Instruments 138

  • Power Line Communication (PLC) Solution

    PLC solutions from TI are flexible and support multiple standards, resulting in reduced R&D costs and quicker time to market.

    By Texas Instruments 54

Top